CITIZEN CT-S4000L - Manual (Page 13)

— 10 —
2. EXPLANATION OF PRINTER PARTS
2.1 Printer Appearance
POWER LED
FEED button
ERROR LED
Operation Panel
See 4.6 Error Indication
● POWER LED
Illuminated when the printer power is on and off when the printer power is off. May
blink or light in a special mode or in case of failure.
● ERROR LED
Illuminated or blinks when paper is empty or in case of failure.
The interval length of blinking represents the type of error.
● FEED button
Pressing this button once causes the paper to feed one line. The longer the button is
pressed, the more paper is fed.
Pressing this button causes the paper to feed to the next Black Mark position in Black
Mark mode.
In case of auto cutter error, press the FEED button after removing the cause of the
error.
● Printer cover
Paper is loaded under this cover.
● Cover open button
To refill or replace paper, open the printer cover by pulling the cover open button
forward.
● Power switch
This switch turns the printer power ON/OFF.
● Side opening
The cables connected to the printer can be routed through this side opening. (Before
use, push the small plastic barrier on the cover until it brakes.)
See 5.3 Manual Setting of Memory Switch
Printer cover
Power switch Operation panel
Cover open button
Rear connector
(Front view) (Rear view)
Side opening
Side opening