Cuisinart Baby Bottle Warmer BW-10 - Manual (Page 5)

5
USING THE
ADAPTER RING
1. When warming a narrow bottle, we
suggest that you use the adapter ring.
2. Position the adapter ring over the bottle
sitting in the bottle warming chamber
and turn the dial to the ON position. Blue
LED indicator will turn on. The unit will
shut off automatically once bottle warm-
ing is complete. Turn the dial to the OFF
position.
NOTE: If the adapter ring does not fit
loosely around the bottle, do not use.
USING THE FOOD
WARMING BASKET
1. Remove the lid of the food jar and then
place the jar into the food warming bas-
ket. Use the handle to lower it into the
bottle warming chamber (fig. 1).
2. Turn the dial to the ON position. Blue
LED indicator light will turn on. The unit
will shut off automatically once food
warming is complete. Turn the dial to the
OFF position.
3. Let the jar sit for 15 to 30 seconds before
removing. Use the handle of the food-
warming basket to lift the jar out of the
warming chamber (fig. 2). When you
remove the jar from the unit, the contents
of the jar will not be evenly heated. Stir
the food to distribute the heated contents
before checking the temperature.
USING THE NIGHTLIGHT
1. To turn the nightlight on, press the gray
button with the word LIGHT above it
located on the top of the unit.
2. Light will illuminate from the measuring
cup area and from around the dial. The
nightlight will stay on until the button is
pressed again.
1 2