Cobra Electronics ESD-6050 - Manual (Page 6)

Quick Start
5
Turn On and Adjust Volume Turn On and
Adjust Volume
Set Highway/
City Mode
Installation
4
Note
It will be easy for you to
remove and reinstall your
Cobra® ESD-6050 LE
detector at any time using
this hook and loop material
on the dashboard.
Remember: Without the
means to adjust the angle
of the detector (when
mounted as above), be
sure you that your Cobra®
ESD-6050 LE has a level,
clear view of the road
before you attach the hook
and loop material.
Dash Mounting Dash
Mounting
Plug power cord
into detector. Plug power cord
into cigarette lighter.
Peel protective
paper off one side
of hook and loop
material. Place on dash.
Peel top paper off. Place detector on
hook and loop pad.
1 2
3 4
5 6
OFF
Rotate ON-OFF Volume Control to left (away
from you). An audible “tone” will indicate the
unit is on. PWR LED on front of unit
is illuminated. 1
Set Highway/City Mode
City
For urban driving–reduces number of X-Band
audible alerts.
Highway
For all other driving.
Press and release CITY button.
CITY LED will illuminate green while in
City mode
City
CITY MUTE
Press &
Release