Coleman 9998 Series - Manual (Page 10)

Grill Assembly
(continued)
10
1. Install both doors by first
inserting the lower pin and the
upper pin in the hinge holes at
the same time (Fig. 31).
Fig. 31
2. Assemble the Tool Hook to
the left door using three
screws. Tighten the screws
with a screwdriver (Fig. 32).
Fig. 32
Assemble the Doors and the Tool Hook
NOTE: On some models, the Doors and the Tool Hook are pre-
assembled at the factory.
1. Assemble two sets of handles with parts illustrated in (Fig. 33).
Fig. 34
Assemble the Doors Handles
2. Loosely engage the screws
only several turns (Fig. 34). In
the next step, the screw heads
will engage slots in the doors
from the outside before they
are tightened.
Fig. 35
3. Insert the screw heads into the
slots in the outside of the door.
The screws must be inserted
in sequence. First, slide the
short screw into the slot. The
lockwasher must touch the
screw head. Next, insert the
long screw (Fig. 35).
PLEASE NOTE: Only the
slender portion of the long
screw will slide past the
narrow part of the slot. This
feature locks the shoulder
screw in place.
First Last
Fig. 36
4. Tighten both screws with a screwdriver. Access holes are provided on
the inside of each door (Fig. 36).
Shoulder
Narrow
part of Slot
Fig. 33
Lockwasher
Long screw
with shoulder
Short
screw
Lockwasher touches Screw Head