Clarion DXZ655MP - Manual (Page 11)

280-8146-00
DXZ655MP
13
English
Setting the Z-Enhancer Plus
This unit are provided with 4 types of sound
tone effects stored in memory. Select the one
you prefer.
∗ The factory default setting is “Z+ OFF”.
Each time you press the [Z+] button, the tone
effect changes in the following order:
“Z+ OFF” ➜ “Z+ BASS BOOST” ➜ “Z+
IMPACT” ➜ “Z+ EXCITE” ➜ “Z+ CUSTOM” ➜
“Z+ OFF” ...
• Z+ BASS BOOST : bass emphasized
• Z+ IMPACT : bass and treble
emphasized
• Z+ EXCITE : bass and treble
emphasized mid de-
emphasized
• Z+ CUSTOM : user custom
• Z+ OFF : no sound effect
Adjusting the Z-Enhancer Plus
1. Press the [Z+] button and select the Z-
Enhancer Plus mode to adjust.
2. Press the [A-M] button and turning the
[ROTARY] knob clockwise adjusts in the +
direction; turning it counterclockwise adjusts
in the – direction.
● When “BASS BOOST 0” selected, you can
adjust the bass in the range of –3 to 3.
● When “IMPACT 0” selected, you can
adjust the bass and treble in the range of
–3 to 3.
● When “EXCITE 0” selected, you can adjust
the bass and treble in the range of –3 to 3.
∗ When Z-Enhancer Plus is selected, press and
hold the [Z+] button for 1 second or longer to
change to the “CUSTOM” mode.
Bass/treble characteristics become flat and the
“Z+ FLAT” is shown in the display.
Press the [Z+] button again to change to the
“Z+ OFF” mode.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
● When “Z+ BASS BOOST” is set
“SUB-WOOF VOL 0” ➜ “BASS BOOST 0"
➜ “BALANCE 0” ➜ “FADER 0” ➜ Last
function mode.
● When “Z+ IMPACT” is set
“SUB-WOOF VOL 0” ➜ “IMPACT 0” ➜
“BALANCE 0” ➜ “FADER 0” ➜ Last
function mode.
● When “Z+ EXCITE” is set
“SUB-WOOF VOL 0” ➜ “EXCITE 0” ➜
“BALANCE 0” ➜ “FADER 0” ➜ Last
function mode.
● When “Z+ CUSTOM” is set
“SUB-WOOF VOL 0” ➜ “ BASS GAIN 0”
➜ “ TREBLE GAIN 0” ➜ “BALANCE 0” ➜
“FADER 0” ➜ Last function mode.
● When “Z+ OFF” is set
“SUB-WOOF VOL 0” ➜ “BALANCE 0” ➜
“FADER 0” ➜ “Last function mode.
∗ “SUB-WOOF VOL” can be adjusted only when
“SUB-WOOFER” is set to “ON”.
Adjusting the subwoofer output
volume
You can adjust the volume output from the unit’s
subwoofer output terminal.
1. Press the [A-M] button and select
“SUB-WOOF VOL 0”.
2. Turning the [ROTARY] knob clockwise
increases the output volume; turning it
counterclockwise decreases the output
volume.
∗ The factory default setting is “0”. (Setting
range: –6 to 6)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Basic Operations