Canon L2000 User Manual
Page 16
15
XI CONFIRMATION
REPORT
To Request For A Transmission (TX) Report Only For One Particular
Sending
Setting up the Program One-Touch Key
1.
Open all three all three panel covers
2. Press
Data Registration
3.
Press ▼ until display shows “3. FAX SETTINGS”
4. Press
OK to display “1. USER SETTINGS”
5. Press
OK
6.
Press ▼ until display shows “6. PROG 1-TOUCH KEY”
7. Press
OK
8.
Press ▼ to an available speed-dial number to which you want to
assign
9. Press
OK
10. Press ▼ to display “USE”
11. Press
OK to display “1. PRINT REPORT”
12. Press
OK again
13. Press
Stop
To activate the TX Report
1.
Press the speed dial number which has been assigned for TX report
2.
Press * to confirm
3.
Start the usual sending
After the transmission, the machine will print TX REPORT for that sending
only.