Chicago Electric 1.5HP 7" Bridge Tile Saw 98265 - Manual (Page 6)

Page 6 For technical questions, please call 1-800-444-3353. SKU 98265
check that the saw teeth are not en-
gaged into the workpiece before turn-
ing on the saw.
• Push the wood stock past the blade
prior to release.
11. Check guards for proper operation with
saw disconnected from power before
each use. Do not disable any guard. Do
not operate saw if any movable guard
does not move freely and close instantly.
Make sure any movable guard does not
touch the blade in all angles, depths of
cut, and positions.
12. Keep the guard in place while through-
sawing. Verify that the spreader lines up
with the blade to prevent binding.
13. Construct an appropriate Push Stick out
of wood according to the guidelines on
the following page.