Compaq TFT 2025 - Manual (Page 21)

2025 Flat Panel Display
User’s Guide 17
Entering User Modes
The video controller signal may occasionally call for a mode that
is not preset if:
■ You are not using a Compaq standard graphics adapter.
■ You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the
monitor screen by using the on-screen display. Your changes can
be made to any or all of these modes and saved in memory. The
monitor automatically stores the new setting, then recognizes the
new mode just as it does a preset mode. In addition to the 18
factory preset modes, there are four user modes that can be
entered and stored.
Energy Saver Feature
When the monitor is in its normal operating mode, the monitor
uses less than 70 watts of power and the Power light is green.
The monitor also supports a reduced power state. The reduced
power state will be entered into if the monitor detects the absence
of either the horizontal sync signal and/or the vertical sync signal.
11 1152 x 870 69.0 75.0
12 1152 x 900 61.80 65.96
13 1280 x 960 60.0 60.0
14 1280 x 1024 63.9 60.0
15 1280 x 1024 79.98 75.0
16 1280 x 1024 91.1 85.0
17 1600 x 1200 75.0 60.0
18 1600 x 1200 93.8 75.0
Factory Preset Display Modes
Preset Pixel Format Horz Freq (kHz) Vert Frep (Hz)
305494-001.book Page 17 Tuesday, August 20, 2002 8:36 AM