Curtis RCD926 User Manual
Page 4
English
English
5
6
AM/FM TUNER
OPERATION
•
Press the STANDBY Button to ON . The Standby indicator will go off.
•
Set the Function Selector to the TUNER position.
• Select the desired frequency band with the Radio Band Selector .
•
Tune to the desired radio station by turning the Tuning control .
•
Press the STANDBY Button to OFF.
ANTENNA
•
For FM reception there is a built-in FM antenna wire at the rear of the unit. Move the wire
around to obtain the best reception.
•
For AM reception the signals are picked up through a built-in ferrite antenna. Your may
have to orient the unit to obtain the best reception.
FM & FM-STEREO RECEPTION
•
Stereo reception is possible when the tuned FM station is broadcasting in stereo.
•
When the FM Stereo button is “up” and the station is broadcasting in Stereo, the
STEREO indicator lights up.
•
When FM stations are weak and are disturbed, listening can be improved by pressing
down the FM STEREO selector . Reception will then be in MONO.
CASSETTE OPERATION
INSERTION AND REMOVAL OF CASSETTES
•
Press the STANDBY Button to ON . The Standby indicator will go off.
•
Set the Function Selector to the TAPE position.
•
Press the Stop / Eject Key to open the Cassette Door of Compartment B.
•
Slip your cassette tape into the door, with the exposed section uppermost and the
playback side facing you.
•
Close the Cassette Door securely.
•
When finished, press the Stop / Eject Key to open the Cassette Door, and retrieve your
cassette tape.
PLAYBACK
•
Set the Function Selector to the TAPE position.
•
Insert your cassette tape in the Compartment B.
•
Press the Play Key to activate playback.
•
Use the Pause Key whenever you want to suspend playback.
•
Press the Stop / Eject Key when finished. Otherwise the tape will stop automatically
when the end of the tape is reached.
CONTINUOUS PLAYBACK ( ONLY RUNNING FROM TAPE DECK B TO A )
•
Set the Function Selector to the TAPE position.
•
Insert your cassette tapes.
•
Press the PLAY Key of deck B.
•
Press the PAUSE Key and the PLAY Key of deck A.
•
Deck B will now proceed to play its side.
•
Adjust the VOLUME control to the preferred level.
•
When Tape Deck B has finished playing, it will stop. Tape Deck A then starts playing
back automatically.
•
When Tape A reaches its end, it automatically stops.
RECORDING (ONLY ON TAPE DECK A)
•
This unit has Automatic Level Control circuitry. This means that the recording level is
set automatically. The volume or tone controls will not affect the recording.
•
Record Key will not be pressed down when the record prevention tab is broken or
removed from the tape.
RECORDING FROM THE RADIO
•
Set the Function Selector to the TUNER position.
•
Tune in your station using the TUNING Control and put in your blank cassette tape in
cassette compartment “A”.
•
Press the Record Key and the Play Key at the same time on Tape Deck A to start
recording.
•
Press the Stop / Eject Key when finished. Otherwise the tape will stop automatically
when the end of the tape is reached.
RECORDING FROM THE CD
•
Set the Function Selector to the CD position.
•
Put in your blank cassette tape in cassette compartment “A” .
•
Select the CD (1,2 or 3) you want to play/record with the Disc Selector button .
Press the Record Key and the Play Key at the same time on Tape Deck A to start
recording. Press Play/Pause Key on the CD player.
•
Press the Stop / Eject Key when finished. Otherwise the tape will stop automatically
when the end of the tape is reached.