Casio NONE FOUND CDP-220R - Manual (Page 54)

Recording Your Keyboard Play
E-52
You can record up to five songs (numbered 1 through 5) in
memory. After that, you can select a specific song for
playback.
1.
Press
bo
(RHYTHM).
2.
Press
bk
.
A song number will appear in the upper left corner of the
display for a few seconds. While it is, use
br
(10-key) to
specify the number of the song you want to record or play
back. The song number will disappear if you do not
perform any operation.
3.
Press
bk
to record, or
7
to play back.
To stop recording or playback, press
7
.
4.
Press
bk
twice to exit the recorder mode.
■ To delete recorded data
After step 2 of the above procedure, do hold down
bk
(without pressing any keyboard key) until the message “Song
Del?” appears on the display. Press [+] (YES) to delete the
song, or [–] (NO) to cancel the delete operation.
This section explains how to play along and record along with
one of the Digital Piano’s built-in songs.
● The following operations and settings also are
recorded along with your keyboard play.
Tone number, song number, pedal operation, tempo, reverb,
chorus, layer/split settings, pitch bend wheel operation
• There can be only one recording of keyboard play with a
built-in song in recorder memory. Making a new recording
replaces (deletes) previously recorded data.
1.
Press
bn
(SONG BANK).
2.
Press
bk
.
This will enter playback standby.
3.
Press
bk
again.
This will enter record standby.
4.
Use
br
(10-key) to enter the song number you
want to assign to the recording.
Recording Two or More Songs,
and Selecting One for Playback
Example: Song 2
P l a y N o .
Recording while Playing Along
with a Built-in Song
Lights
Flashes