Casio KL-7400 - Manual (Page 59)

E 56
Message See page: Cause and Action
TOO SHORT TO CUT!
SET/ESC The unused tape at the
beginning of a numbering label
cannot be cut or cutting
between labels is not possible.
• To print without cutting, press
SET.
After printing is complete,
use scissors to cut the labels.
• To print with auto cutting,
change the settings to
increase the margin width
(from NARROW to MEDIUM,
or from MEDIUM to WIDE).
Left and right margins can
auto cutting can be ensured
by selecting FULL CUT for
the tape cut mode and WIDE
for the margins setting.
20, 29