Inserting an sd card, Turning the camera on, Setting the language – Concord Camera 6340z User Manual

Page 4

Advertising
background image

2

ENU

3

INSERTING AN SD CARD

The digital camera is equipped with a 16 MB internal memory. If no SD card
is inserted in the camera, all pictures/video clips recorded by the camera will
be stored in the internal memory. When SD card is inserted in the camera, all
pictures and video clips recorded by the camera will be stored on the SD card

1. Turn off the camera.
2. Slide the Battery/Memory Card Door in the direction of the button to open

the door.

3. Insert the SD card in the direction as shown in the figure aside.
4. Close the Battery/Memory Card Door.

4

TURNING THE CAMERA ON

Slide the Power Switch to the right side and hold it until the green status LED lights up. It takes about 2
seconds to power on the camera.

Note:
1. You may also press and hold the

button for more

than 1 second to turn the camera on in Review mode to
review the stored pictures/video clips.

2. If the camera cannot be powered on, the batteries may be

drained. Recharge the battery and try again.

5

SETTING THE LANGUAGE

1. Press the MENU button.
2. Press the button to select the Setup Menu.
3. Press the

or

button to select the desired Language.

4. Press the or button to select a Language.
5. Press the MENU button to close the menu window.

Power switch

Status LED (green)

6340 QSG 516085-00

11/1/04, 9:40 AM

2

Advertising