Cub Cadet 8404 - Manual (Page 54)

54
SECTION 6: SPECIFICATIONS
Model 8404
Maximum PTO Power 33.4 PS
Engine GROSS Power 40.4 HP
Engine Model 4A200
Type Indirect injection, water cooled, 4-cycle diesel
Number of cylinders 4
Bore and Stroke 3.268 x 3.637 Inches
(83 x 92.4 mm)
Total displacement 121.9 cu. in (1,999 cc)
Rated revolutions 2700 RPM
Injection timing 18° before T.D.C.
Injection order 1-3-4-2
Compression ratio 22:1
Lubrication system Forced Lubrication
Cooling system Pressurized radiator, forced circulation with water pump
Alternator 12V, 50 amps
Weight (Dry) 450 Lbs. (205 kg)
Capacities Fuel tank 11.5 Gal. (43.7 L.)
Engine crankcase 1.9 Gal. (7.0 L.)
Engine coolant 2.4 Gal. (8.9 L.)
Transmission case 11.6 Gal. (44 L.)
Front axle case 2.0 Gal. (7.5 L.)
Dimensions
(with std.
tires) Overall length (without 3 pt.) 129.3 in.
Overall length (with 3 pt.) 139.8 in.
Overall width (max. w/ Ag tires) 59.3 in.
Overall height (Top of ROPS) 94.3 in.
Overall height
(Top of steering wheel) 60.8 in.
Wheelbase 70 in.
Ground Clearance 10.1 in.
Tread width
with std. tires Front 48.4 in.
Rear 45.6 - 57.8
Traveling
system Clutch Dry single stage
Steering Hydrostatic steering system
Transmission Synchronized shuttle and transmission
8 forward and 8 reverse speeds
Brake Traveling Wet disc type
Parking Connected to traveling brake
Differential Bevel gear
Hydraulic
system Hydraulic lift control system Position, Draft, and Mixed control
Pump capacity Main pump 7.8 gal./min. (29.7 L/min.)
Power strng. 4.7 gal./min. (17.8 L/min.)
Three point hitch SAE Category 1
Maximum lifting capacity
(at hitch lift point) 2270 lbs. (1021 kg)