Casio EXILIM EX-ZS150 - Manual (Page 14)

14
Quick Start Basics
To replace the battery
1.
Open the battery cover and remove
the current battery.
With the monitor screen side of the
camera facing upwards, slide the
stopper in the direction indicated by the
arrow in the illustration. After the battery
pops out, pull it the rest of the way out of
the camera.
2.
Load a new battery.
You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer
.
To charge with the USB-AC adaptor
1.
Turn off the camera.
Check to make sure that the camera’s monitor screen is
blank. If it isn’t, press [ON/OFF] (Power) to turn off the
camera.
2.
After connecting the
supplied USB cable
to the USB-AC
adaptor, plug the
power cord into a
household power
outlet.
Charge the Battery
Stopper
[ON/OFF] (Power)
USB
USB-AC adaptor
Power cord
USB cable (included with camera)
USB port
Large connector