Step 3: connecting the rf receiver, Step 3: connecting the rf receiver -3 – CREATIVE 9000 Pro User Manual
Page 18
Installing Creative Desktop Wireless 9000 Pro 3-3
Step 3:
Connecting the
RF Receiver
1. Connect the USB connector on the RF receiver to the USB port on your
computer as shown in Figure 3-2.
For Windows XP/2000/Me
After you have connected the USB device, Windows will detect the USB device and
install the required drivers automatically.
For Windows 98 SE
Users may be prompted by an Add New Hardware Wizard dialog box when
Windows detects the USB device. Make sure the original mouse is connected and
follow the instructions on the screen. You may need to insert the Windows
Installation CD into the CD-ROM drive. Some computers may be supplied without
the Windows CD, but have the necessary files stored in
c:\windows\options\cabs (replace c:\ with the drive letter your Windows has
been installed on).
Figure 3-2: Connecting the RF receiver to the computer