CyberPower Systems Network Management Card - Manual (Page 13)

Cyber Power Network Management System
11
[UPS Schedule]: Sets the UPS to automatically shutdown and restart at consistent times -
weekly or daily.
[Special Shutdown]: The user may set a specific date and time for UPS shutdown.
[Weekly]: Set a specific day and time of the week for UPS shutdown.
[Daily]: Set a specific time of the day for UPS shutdown.
1.
Click [Special], [Daily] or [Weekly] scheduled shutdown features to enter each setup menu.
2. Enter the date and time to shut down the UPS. Please note that time is entered using
24Hr clock format (hh:mm).
3. Select [Never], [Immediately], [Same Day], [Next Day] for the UPS to recover power.
4. Click [Add] to add the item to the Schedule. Click [Cancel] to remove the item from the
Schedule.
5. Applied settings are listed in [Schedule Log] menu.
Please Note: The management system allows only 10 scheduled settings.