CLIFFORD 330.3X - Manual (Page 12)

9 © 2009 Directed Electronics. All rights reserved.
Icon Description
Zone Status
On during a sensor zone full trigger output
On during fault report to indicate a sensor is active and
bypassed when arming
On during the door zone full trigger output
On during fault report to indicate a door is open and bypassed
when arming
On during a hood zone full trigger output
On during fault report to indicate the hood is open and
bypassed when arming
On when remote is set to command the system programmed
as car 1*
On when remote is set to command the system programmed
as car 2*
Remote Control Status
Bars indicate battery level is full, ¾,½,¼ or empty
On while the remote control is transmitting a command
On while the remote control is receiving a message
On with out of range fault tone to indicate the remote failed to
receive a command confirmation
Pager on: The remote will wake up to listen for messages
Pager off: The remote will not wake up to listen for messages
The remote will vibrate when messages are received
The remote will emit beeps and tones when messages are
received