CITIZEN PD-24 - Manual (Page 24)

24
Printer Preparation
About the Power Source
Turning the Power Off
When you slide the power switch towards you and hold it, the POWER LED changes from
steady green to flashing orange. After this happens, releasing the power switch cuts off the
power.
Turning the Power On
When you slide the power switch towards you and hold it, all LED’s turn on, and if the printer
can print, the POWER LED glows steady green. After the POWER LED turns on, release the
switch.
When the power has been cut off by the Auto Power Off function, push the
power switch again to restore the power. Be careful because all temporary
settings in the printer (downloaded character data, text size, etc.) are reset
to the VuePrint menu settings when power is turned on again. This function
does not operate when it is powered by the AC adaptor.
Auto Power Off (setting the power saving time) Function
The printer can automatically cut off the power to conserve the battery pack when inactive for
a specified period of time.
The set time can be changed in menu setting mode between four settings: 3 minutes, 5 minutes,
10 minutes, and invalid. (It is set at 3 minutes when the printer is shipped from the factory.)
Power switch
Steady (green)
Steady
(green)
Steady
(red)
Steady
(green)
Steady
(green)
Steady (green)
Power switch
Flashing (Orange)
Steady
(green)