Cub Cadet EX3200 - Manual (Page 65)

9-5
9. POWER TAKE OFF (PTO)
Ex2900 / 3200 Operator's Manual
4. Move each Power Take Off (PTO) engagement lever
to the OFF position.
(A) Rear Power Take Off (PTO) engagement lever
(B) Mid-Power Take Off (PTO) engagement lever
(option)
(a) OFF position
(C) Switch plunger (Seat safety switch)
5. Sit on the operator’s seat.
6. Start the engine.
7. Fully depress the clutch pedal and pull the Rear Power
Take Off (PTO) engagement lever to the engaged
position.
(A) Clutch pedal
(B) Rear Power Take Off (PTO) engagement lever
8. Adjust the engine speed so that the Power Take Off
(PTO) runs at a recommended speed.
9. Before stopping the engine and leaving the tractor, idle
the engine.
If the parking brake is engaged, then the engine will not
stop even when the operator rises from the operator's
seat.
The engine will remain running only when Mid-Power
Take OFF (PTO): N and Range shift: N and Parking: ON.
Be sure to keep the cap installed while the Power Take
OFF (PTO) is not mounted.
The cover can be tilted upward.
3013711b
(A)
(a)
(B)
(a)
P3013702
(C)
3013703a
(B)
(A)