Cortelco 9225 - Manual (Page 16)

16
REDIAL BUTTON
1. To redial the last number dialed, come off hook and press REDIAL.
2. The selected number (32 digits maximum) will be redialed.
To review dialed numbers.
1.
While on hook, press REDIAL.
2. The display will show the last number dialed.
3. Use or to scroll through the list of dialed numbers. The last 15 dialed numbers
are stored.
4. To dial the displayed number, go off hook. The number will be dialed after
approximately 3 seconds.
CALL FORWARD ON
When you come off hook and press this button, the 9225 will dial *72. This is a standard
code to activate call forwarding. For more information about call forwarding, contact
your telephone company.
CALL FORWARD OFF
When you come off hook and press this button, the 9225 will dial *73. This is a standard
code to deactivate call forwarding. For more information about call forwarding, contact
your telephone company.
VOLUME BUTTON
A built-in amplifier feature allows you to change the listening volumeon the handset,
headset or speaker. Press
- or + to change the volume. There are 8 levels.
MENU BUTTON
Press this button to access the Phone Book or to enter setup mode.
DELETE BUTTON
Use this button to delete characters on the display.
SAVE BUTTON
Use this button to store numbers in memory or the Phone Book.
MESSAGE BUTTON
If you have a voice mail service, the large red indicator above the display will flash to
alert you that you have new messages. The display will also show an icon of an
envelope. The 9225 will only detect FSK message waiting signals.
Press MESSAGE to retrieve your messages. This button will dial out *98 which is a
common code to retrieve messages. If your service requires a different code, you can
program the MESSAGE button by following the instructions for programming speed
dial on the following page.