Canon A2200 - Manual (Page 165)

165
If you think there is a problem with the camera, first check the following. If the
items below do not solve your problem, contact a Canon Customer Support
Help Desk as listed on the included customer support list.
Power
You pressed the ON/OFF button, but nothing happened.
• Confirm that the battery is the correct type, and is not depleted (p. 15) .
• Confirm that the battery is properly inserted (p. 16) .
• Confirm that the memory card/battery cover is securely closed (p. 17) .
• If the battery terminals are dirty, battery performance will decrease. Clean the terminals
with a cotton swab and re-insert the battery several times.
Battery is consumed quickly.
• Battery performance decreases at low temperatures. Warm the battery, for example, by
placing it in your pocket with the terminal cover on.
Lens will not retract.
• Do not open the memory card/battery cover while the power is on. After closing the
memory card/battery cover, turn the power on then back off
(p. 17) .
TV output
Image is distorted or not showing on TV (p. 121) .
Shooting
Cannot shoot.
• Set the mode dial to a Shooting mode (p. 44) .
• When in Playback mode (p. 21) , press the shutter button halfway (p. 23) .
Screen does not display properly in dark places (p. 47) .
Screen does not display properly while shooting.
Please note, the following will not be recorded in still images, but will be recorded in movies.
• When the camera is subjected to powerful light sources, the display may darken.
• When shooting under fluorescent or LED lighting, the screen may flicker.
• When shooting bright light sources, a bar of light (purplish red) may appear on the
screen.
A flashing h appears on the screen and the shot cannot be taken even
though the shutter button was pressed fully (p. 26) .
appears when the shutter button is pressed halfway (p. 56) .
• Set the [IS mode] to [Continuous] (p. 160) .
• Set the flash to h (p. 85) .
• Increase the ISO speed (p. 87) .
• Attach the camera to a tripod. Additionally, you should set the [IS Mode] to [Off] when
shooting with a tripod
(p. 160) .
Troubleshooting
A3300 IS A3200 IS
A3300 IS A3200 IS