Clarion DXZ735MP - Manual (Page 9)

DXZ735MP
13
English
“Z+ OFF” ➜ “BASS BOOST” ➜ “IMPACT” ➜
“EXCITE” ➜ “CUSTOM” ➜ “Z+ OFF” ...
• BASS BOOST : bass emphasized
• IMPACT : bass and treble empha-
sized
• EXCITE : bass and treble empha-
sized mid de-emphasized
• CUSTOM : user custom
• Z+ OFF : no sound effect
Adjusting the Z-Enhancer Plus
1. Press the [Z+] button and select the Z-En-
hancer Plus mode to adjust.
2. Press the [A-M] button and turning the
[ROTARY] knob clockwise adjusts in the +
direction; tuning it counterclockwise adjusts
in the – direction.
● When “B-BOOST 0” selected, you can ad-
just the bass in the range of –3 to 3.
● When “IMPACT 0” selected, you can adjust
the bass and treble in the range of –3 to 3.
● When “EXCITE 0” selected, you can adjust
the bass and treble in the range of –3 to 3.
∗
When Z-Enhancer Plus is selected, press and
hold the [Z+] button for 1 second or longer to
change to the “CUSTOM” mode.
Bass/treble characteristics become flat and
the indication “Z+FLAT” is shown in the dis-
play.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
● When “BASS BOOST” is set
“B-BOOST” ➜ “BAL 0” ➜ “FADER 0” ➜
Last function mode.
● When “IMPACT” is set
“IMPACT” ➜ “BAL 0” ➜ “FADER 0” ➜ Last
function mode.
● When “EXCITE” is set
“EXCITE” ➜ “BAL 0” ➜ “FADER 0” ➜ Last
function mode.
● When “CUSTOM” is set
“BASS” ➜ “TREBLE” ➜ “BAL 0” ➜ “FADER
0” ➜ Last function mode.
● When “Z+ OFF” is set
“BAL 0” ➜ “FADER 0” ➜ Last function
mode.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
1. Press the [A-M] button and select “BASS”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗
The factory default setting is “B Е Е Е Е Е GAIN 0 О О О О О ”.
(Adjustment range: –6 to +8)
3. Press the [ d ] or [ a ] button to select
“B Е Е Е Е Е FREQ 50 О О О О О ”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗
The factory default setting is “B Е Е Е Е Е FREQ 50 О О О О О ”.
(Adjustment 50/80/120 Hz)
4. Press the [ d ] or [ a ] button to select “B Е Е Е Е Е Q 1 О О О О О ”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
∗
The factory default setting is “B Е Е Е Е Е Q 1 О О О О О ”.
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
1. Press the [A-M] button and select “TREBLE”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
∗
The factory default setting is “T Е Е Е Е Е GAIN 0 О О О О О ”.
(Adjustment range: –6 to +6)
3. Press the [ d ] or [ a ] button to select
“T Е Е Е Е Е FREQ 12K О О О О О ”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗
The factory default setting is “T Е Е Е Е Е FREQ 12K О О О О О ”.
(Adjustment 8 kHz/12 kHz)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Basic Operations