Clickfree DVD Transformer - Manual (Page 9)

Clickfree DVD Transformer for Macintosh: User Guide Backing up my content
Backing up my content
H
OW DO
I
START USING MY
C
LICKFREE
DVD T
RANSFORMER
?
♦ To start using your Clickfree DVD Transformer:
1. Make sure that your computer is switched on and has finished starting up.
2. Log in, if that is what you normally do.
Note:
You should close all open applications before starting to back up your files.
3. Attach the Clickfree DVD Transformer to your computer by plugging it in to a USB
port on your computer.
USB ports usually looks like this: .
Wait for the Clickfree window to appear. You may have to wait up to a full minute for
your computer to recognize the Clickfree DVD Transformer.
4. The first time you connect your Clickfree DVD Transformer, the Start Clickfree
Backup window appears on the desktop.
5. Double-click the icon to start the backup. Every time after the first time the backup
starts by itself.
When the Clickfree backup starts to run, a Welcome window appears and shows the
number of seconds left before the backup starts automatically:
Note: The View Files and Restore buttons do not appear until you have backed up
content using the DVD Transformer.
Copyright © 2009 Storage Appliance Corporation. 9