Chicago Electric Heavy Duty Hot Knife 66182 - Manual (Page 9)

SKU 66182 For technical questions, please call 1-800-444-3353. Page 9
TO prEVENT SErIOUS
INJUrY FrOm TOOl
FAIlUrE:
Do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
BEFORE EACH USE, inspect the 1.
general condition of the Hot Knife.
Check for loose screws, misalignment
or binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
AFTER USE,
2. clean external surfaces
of the tool with clean cloth.
3. WArNINg! If the Power Cord (21)
of this power tool is damaged, it must
be replaced only by a qualified ser-
vice technician.
mAINTENANcE AND
SErVIcINg
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
TO prEVENT
SErIOUS INJUrY
FrOm AccIDENTAl
OpErATION:
Turn the power Switch (19) of
the Hot Knife to its “OFF”
position and unplug the tool
from its electrical Outlet
before performing any
inspection, maintenance, or
cleaning procedures.
TrOUBlESHOOTINg
problem possible cause possible Solution
Hot Knife will not turn on. No power at electrical outlet. 1.
Power Switch not pressed. 2.
Check power at outlet. 1.
Press and hold Power Switch. 2.
Hot Knife turns on, but does not
heat up.
Temperature on Selector 1.
Knob not selected.
Turn the Temperature 1.
Selector Knob to the desired
temperature setting.
Hot Knife does not maintain pre-
selected heat temperature during
operation.
Power Switch not pressed 1.
and held.
Press and hold Power Switch 1.
throughout operation.
Follow all safety precautions whenever diagnosing or servicing the Hot
Knife. Disconnect power supply before servicing.