ClearSounds PHONE A1600 - Manual (Page 30)

30 – ENGLISH
█
Dialing Mode Setting
Your ClearSounds® A1600 comes from the factory preset for
touch-tone service. Should you need to change this setting
based on the type of phone service you have, use Tone for
touch-tone service or Pulse for rotary dialing.
NOTE
: If you are not sure which dialing mode to select, please
contact your local phone service provider. To change this
setting:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press to scroll to Set Phone and then press under
the word Select.
3. Press or to scroll to Dialing Mode and then press
under the word Select.
4. Press or to select Tone or Pulse and then press
the under the word Save.
█
Call Waiting (Flash)
Your ClearSounds® A1600 comes from the factory preset for
Flash Time to 600ms. Flash timing is the signaling process
that tells the phone system when a phone is on hook or off
hook. The United States uses a 600ms timing sequence. The
European Union uses a 300ms timing sequence. You can
choose from 100ms, 300ms or 600ms. To change this setting:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press to scroll to Set Phone and then press under
the word Select.
3. Press or to scroll to Set Flash and then press
under the word Select.
4. The display shows the current setting. Press or to
choose from 100ms, 300ms, or 600ms and then press
under the word Select.