Setting up the modem, Setting up the modem -2 – CREATIVE Blaster v.92 External User Manual
Page 11
Advertising
1-2 Installing the Modem
Setting up the
Modem
1. Switch off your system and unplug the power cord from the wall outlet.
2. Connect the Power adapter and the RS232 cable to the modem as shown in Figure 1-1.
3. Connect the Power adapter to a power outlet and the RS232 cable to the computer’s serial
port.
4. Switch on your modem.
Figure 1-1 Setting up the Modem
Telephone
Telephone
wall outlet
To a computer
serial port
Power adapter
Phone jack
Telephone Line jack
Power jack
RS232
Connector
Power On/Off
switch
Advertising