Citizen Systems PD-04 - Manual (Page 19)

– 15 –
Feeding Cut Sheets from the Top
1 Turn the printer on.
[ Put the Paper Depress lever
down.
[ The error lamp will start flashing.
2 Insert the end of the paper straight into the insert path.
[ As seen in the illustration to the right, holding both sides of the paper with
your hands, push the paper through the top insert path until it stops and
the error lamp stops flashing. After a few seconds the paper will feed in
automatically and the printer will be ready for operation.
3 Step 3 and the steps after are the same as with the rear insertion path.