Clarion Net DXZ638RMP - Manual (Page 9)

DXZ638RMP
13
English
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
●When “BASS BOOST” is set
“B-BOOST”
➜ “BAL 0” ➜ “FADER 0” ➜
Last function mode.
●When “IMPACT” is set
“IMPACT”
➜ “BAL 0” ➜ “FADER 0” ➜ Last
function mode.
●When “EXCITE” is set
“EXCITE”
➜ “BAL 0” ➜ “FADER 0” ➜ Last
function mode.
●When “CUSTOM” is set
“BASS”
➜ “TREBLE” ➜ “BAL 0” ➜
“FADER 0”
➜ Last function mode.
●When “Z+ OFF” is set
“BAL 0”
➜ “FADER 0” ➜ Last function
mode.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
1. Press the [A-M] button and select “BASS”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗ The factory default setting is “B
Е Е Е Е Е GAIN 0 О О О О О ”.
(Adjustment range: –6 to +8)
3. Press the [ d] or [a] button to select
“B Е Е Е Е Е FREQ 50 О О О О О ”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is “B
Е Е Е Е Е FREQ
50 О О О О О ”.(Adjustment 50/80/120 Hz)
4. Press the [ d] or [a] button to select “B
Е Е Е Е Е Q 1 О О О О О ”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
∗ The factory default setting is “B
Е Е Е Е Е Q 1 О О О О О ”. (Ad-
justment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
1. Press the [A-M] button and select “TREBLE”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
∗ The factory default setting is “T
Е Е Е Е Е GAIN 0 О О О О О ”.
(Adjustment range: –6 to +6)
3. Press the [ d] or [a] button to select
“T Е Е Е Е Е FREQ 12k О О О О О ”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is “T
Е Е Е Е Е FREQ 12k О О О О О ”.
(Adjustment 8 kHz/12 kHz)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [A-M] button and select “BAL 0”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
∗ The factory default setting is “BAL 0”. (Adjust-
ment range: L13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [A-M] button and select “FADER 0”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
∗ The factory default setting is “FADER 0”. (Ad-
justment range: F12 to R12)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Basic Operations