Pro-Ject Audio Systems Stereo Box S - Manual (Page 3)

© Audio Trade GmbH · Pro-Ject Stereo Box S – 25/37W · Revision 2014.2.1
3
Remote control
1
ON/OFF
turns the unit on or back into standby
0 _
VOL
and
0
+ VOL
adjust the sound volume
CH+
CH-
VOL+ VOL-
ON/OFF
0 _
CH
and
0
+ CH
select the inputs
Front panel controls
Stereo Box S
To switch on from standby or to standby
The push button (press and hold to switch into standby mode) on the left hand side of the front panel turns the
unit on or back into standby. The blue LED above the stand-by push button shows that the unit is switched on.
Input selector
After the unit is powered on, pressing the push button on the right, selects the In 1 and In 2 inputs in turn.
The optional input expander Pro-Ject Switch Box S provides three more inputs. For further details please see the
user guide of the Pro-Ject Switch Box S.
Volume
Adjust the volume to the desired level, using the large knob on the front panel.