Pro-Ject Audio Systems Bluetooth Box E - Manual (Page 3)

© Pro-Ject Audio Systems · Pro-Ject Bluetooth Box E · Revision 2014.4.10
3
Open Settings and tap on Bluetooth. Turn on Bluetooth and tap on Scan. Searched devices will show up.
Tap on "Music Receiver" (Enter "0000" if requested). Once paired it will show "Connected to media
Audio", now you can play music from your Android device over Bluetooth to Bluetooth Box E.
Pairing with Apple devices
Tap on Settings, tap on Bluetooth, turn on Bluetooth, your device will automatically start searching for
available devices. Tap on "Music Receiver" and it will be connected to the Bluetooth Box E. Now you can
play music.
Reconnecting
If you move out of range or turn off Bluetooth, Bluetooth Box E will disconnect from your device. To
reconnect simply open the Bluetooth manager and tap on "Music Receiver". If the signal is lost for less
than 15 seconds it can reconnect automatically - typically if you move out of the range and then return
back.
Adding a new phone or tablet
The unit can play music from one device at a time, but it is capable of being paired to up to 8 devices. If
you want to switch from one device to another, you have to disconnect existing connection to Bluetooth
Box E and then follow the steps for pairing.
Troubleshooting
No music from speakers:
- make sure the Bluetooth Box E is powered
- make sure an audio cable or an optical cable is correctly connected to Bluetooth Box E
- make sure you are within the range
- make sure the Bluetooth is enabled and the device is connected to Bluetooth Box E. Volume level is
properly set
Technical specifications Pro-Ject Bluetooth Box E
Effective range of wireless signal up to 10m in case of direct visibility
Line-level output: 1 x jack 3,5mm
Output voltage: 2Vrms
Digital outputs: 1 x optical (TOSlink ®
Service
)
Supported codecs: aptX, SBC, A2DP Bluetooth profile
Outboard power supply: 5V/0,6A DC
Power consumption: 300mA DC,<1W in standby
Dimensions W x H x D (D with sockets): 120 x 32 x 100 mm
Weight:
250g without power supply
Should you encounter a problem which you are not able to alleviate or identify despite the above
information, please contact your dealer for further advice. Only if the problem cannot be resolved there,
the unit should be sent to the responsible distributor in your country.