Cobra Electronics Pro 9580 - Manual (Page 9)

Settings
Your Detector
Nothing comes close to a Cobra ® 13
Settings
Your Detector
12 English
Spectre 1 And VG-2 Alert Audio Settings
The detector is undetectable by police Spectre 1 and VG-2 radar detector
detectors and will alert you when such a device is in use near your vehicle.
During the alert, the unit continues to detect other signals. You can choose
whether or not you want your unit to show Spectre 1 and VG-2 alerts.
The factory setting is Spectre 1 and VG-2 alert On.
Dim Button
Press and hold for
two (2) seconds
Voice/Tone Setting
You can set your detector to sound alerts with either a Voice
or a Tone. You can change settings by using the Mute button.
In Voice Alert mode, you will first hear several tones, then a
voice message announcing the type of signal detected, followed
by more tones. In Tone Alert mode, you will hear the tones only.
The factory setting is Voice Alert mode.
Mute Button
Press and hold for
two (2) seconds
To Change From Voice Alert To Tone Alert
While no signal
is being detected,
press and hold
the Mute button for
two (2) seconds. Tone Voice Visual Display
One (1) beep Tone Alert None
To Change From Tone Alert Back To Voice Alert
While no signal
is being detected,
press and hold
the
Mute button
for two (2)
seconds again.
Tone Voice Visual Display
None Voice Alert None
To Turn Spectre 1 And VG-2Alerts Off
While no signal
is being detected,
press and hold
the Dim button for
two (2) seconds. Tone Voice Visual Display
One (1) beep Spectre
VG-2 Off Spectre1
& VG 2
Off
To Turn Spectre 1 And VG-2 Alerts On
While no signal
is being detected,
press and hold
the Dim button for
two (2) seconds. Tone Voice Visual Display
Two (2) beeps Spectre
VG-2 On Spectre1
& VG 2
On
Spectre 1 And VG-2 Off
Spectre1
& VG2
Off
Spectre 1 And VG-2 On
Spectre1
& VG2
On