Sb bender -bending instructions – Pro-Tools 105B User Manual
Page 12
Advertising

105-SB BENDER
-BENDING INSTRUCTIONS-
813-986-9000
PAGE 12
PRO-TOOLS
FIG. A
STARTING POSITION
FIG. B
STEP 1 - EXTEND CYLINDER TO A FULL STROKE
STEP 2 - SNUG BOLT ON QUICK RELEASE, SO DIE DOES NOT SPRING BACK.
STEP 3 – REMOVE DIE DRIVE PIN AND RETRACT CYLINDER.
SWING ARM
PIN
***SWING ARM SHOULD BE FULLY RETRACTED IN MAIN ARMS***
Advertising