PulseTech X2 Xtreme Charge 2-Station Battery Charger, Maintainer & Desulfator (100X200) - Manual (Page 4)

2
C H A R G I N G C O N D I T I O N S
Once charger has evaluated battery’s current
condition, “Test” light goes off. The appropriate
charge profile begins automatically.
Green “Charging” light indicates Xtreme Charge ®
is providing bulk charge to battery.
Three green “Pulsing” LEDs light sequentially
as charger conditions battery. Patented Pulse
Technology enables it to accept and maintain its
maximum charge.
During “Test” cycle, charger determines battery’s
state of charge and illuminates the appropriate light:
“25%,” “50%,” “75%” or “100%.”
After battery is charged fully, green “100%” light
illuminates, and “Charging” light goes off. This indi-
cates charger is providing float charge to battery.
It may now be placed into service or left on the
Xtreme Charge
® indefinitely to maintain peak condi-
tion.
If battery has been pulsing and charging for 24
hours continuously without reaching 100% state
of charge, unit discontinues charging. Red “Bad
Battery” light illuminates, indicating the battery is
non-rechargeable.
P U L S E T E C H N O L O G Y
The unique application of patented PULSE conditioning provided by
Pulsetech ® Products increases performance and life cycles of any size
or type of 12V lead-acid battery by minimizing the size of damaging lead