PulseTech ERV 6-Watt 12V Solar Battery Charger Maintainer (735X613) - Manual (Page 2)

Mount The Solar Panel
Mount the solar panel where it will have direct
access to the sun. It can be mounted on the
vehicle or equipment either horizontally or
vertically.
The solar panel can be mounted in one of
the following ways:
• Heavy-duty dual-lock
• Double-sided tape
• Hot glue or other adhesives.
Splicing The Solar Panel Wire (Optional)
If you wish to remove excess wiring between
the solar panel and circuit box, they can be
cut and spliced together. If you wish to
extend the length of the solar panel wires,
they can be spliced with up to 10-feet of the
same gauge wire as the model you are
installing.
NOTE: Only the wires between the solar
panel and the circuit box can be spliced. DO
NOT splice the wires between the circuit box
and battery.
Connect The Wires To The Battery
Terminals
IMPORTANT: The red positive (+) wire must
be connected to the red positive (+) battery
terminal and the black negative (—) wire to
the black negative (—) battery terminal in
order for SolarPulse to work.
To connect the wires, do the following:
• Remove the nut securing the battery
clamp to the positive (+) battery terminal.
• Slip the round metal lug at the end of the
positive SolarPulse terminal wire onto the
clamp bolt
• Screw the clamp nut back onto the bolt
and tighten it securely
• Now repeat the last three steps with the
negative SolarPulse wire
Call For More Information
The SolarPulse is just one of many patented
battery maintenance products available from
PulseTech Products Corporation.
For information on the full line of PulseTech
products, see your local PulseTech dealer.
You can also call 1-800-580-7554. Or go to
our website at www.pulsetech.net to find the
dealer nearest you.
I am using my SolarPulse on my: ■■
Ambulance
■■
Police Crusier
■■
Fir
e T
ruck
■■
Utility T
ruck
■■
Car
■■
T
ruck
■■
OTR
T
ruck
■■
Construction Equipment
■■
Boat
■■
Farm Equipment
■■
Other (please specify):
____________________________
Name ________________________________________Date _________ Addr
ess __________________________________ Apt. No.
__________
City ______________________ State _______ Zip
________________
Pur
chased fr
om:
_____________________________________________
Addr
ess ____________________________________________________
City ______________________ State _______ Zip
________________
Model No. _____________________ Serial No.
___________________
The W
orld Leader in Battery
Performance T
echnology
6-W
att SolarPulse Product Registration
9/2/05
Precautions
• Make sure the terminal lugs are con-
nected to the correct terminals (i.e. posi-
tive on positive). Reversing connections
could drain the battery of power.
• DO NOT hold the positive and negative
ends if the terminal wires at the same time
the solar panel is in sunlight. It can inflict
an electric charge to the body.
• DO NOT hold ends together while the solar
panel is in full sunlight. The wires may
become very warm and cause the unit to
fail.
• In full sunlight this unit is capable of pro-
ducing an open circuit voltage far in
excess of rated volts.
• Any solvents that may be harmful to plas-
tic should not be used on the unit.
• Be cautious with wires around moving
engine parts and accessories.
Please Note
The pulsating dc current produced by this
product may interfere with the correct opera-
tion of some electronic devices when the
unit is placed near the antenna. In order to
insure no interference, the circuit box should
be placed away from the antenna.
Warranty
This unit is guarantied against defective
materials or workmanship for a period of five
(5) years. If, for any reason, this unit should
fail to operate because of defective materials
or workmanship anytime within five (5)
months from the date of purchase, return
the defective unit with proof of purchase to
your distributor for repair or new replace-
ment unit.
U.S. Patent Number: 5,491,399
U.S. Patent Number: 5,592,068
The World Leader in Battery
Maintenance Technology