Installation – RearviewSafety RVS-View_I User Manual
Page 12
6. Installation
6.5 Installing rear view camera
G id
bl
h
i
b
i t
i
• Guide cables as shown in above picture in
installation
[Caution #1] Do not power on the device during cable connection.
Device will not recognize rear view camera if device is turned on and lead to malfunction.
• Plug in cable to device’s “Video-In” port
[Caution #2] Remove all substance from the lens, including the plastic film, that may affect
6.6 Device Working Confirmation
1. Confirm MicroSD card is inside the device
2. Confirm if power cable is correctly connected
3. Start your engine and see red LED is turned on and you hear a sound “ding-dong”
the quality of the recording. Any obstruction may degrade recording quality
12
y
g
y
g
g
4. If all above is true, then device is working correctly and started recording after “ding-dong”
5. Blue LED will blink for few minutes and will stay lit after GPS reception is made