RearviewSafety RVS-CW-CAM - Manual (Page 20)

REAR VIEW SAFETY
20
Troubleshooting
Monitor Display Blue Screen & Displays No Signal
• Do a hard reset, unplug all
cables and power cables leave
out for 1 minute and then
re-connect them.
• Check to ensure that the con-
nection to the camera is tight.
No Image On Screen
• Verify camera is on correct
camera input
• Verify camera is connected
to power/ground
Audio on Camera
• Verify chosen camera has audio • Verify volume setting
NOTE: VERIFY THE SYSTEM IS PAIRED