Roadi OT900 - Manual (Page 2)

OWNER S MANUAL
,
Oil reset tool
1
1. Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the tool,
read this instruction manual first and observe the following
safety precautions at a minimum whenever working on a vehicle:
● Always perform automotive testing in a safe environment.
● Wear safety eye protection that meets ANSI standards.
●
Keep clothing, hair, hands, tools, test equi pment, etc, away from all moving
or hot engine parts.
● Operate the vehicle in a well-ventilated work area; Exhaust gases are
poisonous.
● Put blocks on drive wheels and never leave vehicle unattended while
running tests.
● Use extreme caution when working around the ignition coil, distributor
cap, ignition wires and spark plugs. These components create hazardous
voltages when the engine is running.
●
Put transmission in PARK (for automatic transmission) or NEUTRAL (for
manual transmission) and make sure the parking brake is engaged.
● Keep a fire extinguisher suitable for gasoline/chemical/ electrical fires
nearby.
● Don't connect or disconnect any test equi pment with ignition on or
engine running.
●
Keep the tool dry, clean and free from oil, water and grease. Use a
mild detergent on a clean cloth to clean the outside of the tool, when
necessary.
● Do not soak the keypad as the keypad is not waterproof.