Samson 12-STRAND Class II Tuck-Bury Eye Splice Modified for Saturn-12 User Manual
Page 3
PAGE 3 OF 3
SamsonRope.com
| Tel
+1.360.384.4669
12-Strand Class II Tuck-Bury Eye Splice Modified for Saturn-12
S A M S O N S P L I C I N G I N S T R U C T I O N S
4
step
4
A
After completing the first 5 tucks, remove 1/2 of the volume of the
twisted yarns. Cut yarns from each of the 6 strands near the taped
ends and complete 3 more tucks with the reduced volume strands.
The strands are now
tucked into the braid
of the rope. 1 complete
tuck consists of passing
a strand over 1 strand
and under 2 strands.
The tucks proceed down
the same row of picks
straight down the body
of the rope.
4
B
z
s
z
s
z
z
z
z
s
s
s
s
s
s
z
z
z
z
z
z
t u c K i n g t h e s t r a n d s
s
s
s
Do 5 complete tucks for all 6 strands. Each strand is
always tucked under the same line of the braid so that
the tucks progress straight down the body of the rope.
mark 1
mark 1
mark 2
mark 2
s
s
z
mark 1
mark 2
mark 1
mark 2
z
s
z
s
Tucked strands
3
F
Remove the tape from the end of
the tail. Now smooth the rope from
the eye towards Mark 3. The
tail will disappear into the rope.
Smooth the rope to remove any
remaining slack. Check that the
6 routed strands are snug.
mark 1
mark 2
mark 3
smoothing slacK over taper
5
step
After completing the second set of 3 tucks, cut off the excess strands
and tape the ends. Leave enough of an end protruding so that the
end does not slip back into the rope when the rope is loaded.
F i n i s h i n g t h e s p l i c e
Finished splice
DOCUMENT 12Strand_C2_Tuck-Bury_Eye_Saturn-12.pdf
© 2012 Samson Rope Technologies, Inc. All rights reserved.
S/WD #108294 7/2012