Samson 16-STRAND Class I Eye Splice - Manual (Page 2)

PAGE 2 OF 3
SamsonRope.com | Email [email protected] | Tel +1.360.384.4669
16-Strand Class I Eye Splice
S A M S O N S P L I C I N G I N S T R U C T I O N S
5
step
p e r f o r m i n g s p l i c e
m a r k i n g ta i l s
5 A
Insert fid into rope at Mark B and
out at Mark D.
5 b
Pull tail through body of rope from
B to D.
5 D
Continue to pull the tail end of the rope
through until Mark A and Mark B coincide.
5 c
As each marked strand pair is about to
be buried in the rope at Mark B, carefully
cut each strand in the marked pair.
mark c
mark c
mark d
mark d
mark B
mark B
mark a
Cut as strand
pairs are
about to
be buried
Emerging
wire fid
6
step
6 A
Smooth rope from eye at Mark B, back to
Mark D to remove all slack in the braid.
6 b
Smooth rope from knot to Mark C to bury
as much of the core yarns as possible.
6 c
Mark both cover tail and core yarns where
they exit from the body of the rope.
mark c mark d mark B
Mark tail and
core strands
where they exit
rope
core yarns
tail