Samson DOUBLE BRAID Class II Eye Splice Modified for TS-II Turbo User Manual
Page 5
7
step
PAGE 5 OF 8
SamsonRope.com
| Tel
+1.360.384.4669
Double Braid Class II Eye Splice Modified for TS-II Turbo
S A M S O N S P L I C I N G I N S T R U C T I O N S
Working from the eye towards Mark 4,
perform 5 tucks of the cover strands in the
same alternating pattern; over 1 and under
4, over 1, under 5. The 2 groups of cover
strands should meet near the point where
the cover was initially cut, 2 fid lengths from
Mark 3, and 1-1/2 fid lengths from Mark 4.
W e aV I n g C o V e r g r o u p I n g s : e y e e n D
t r I M I n g b a C k ta p e D ta I l s
Weave strand groupings
under core picks
Alternate 4
and 5 Picks
4 picks
4 picks
5 picks
5 picks
8
step
Cut back the cover tails leaving a 1/2 fid length of tail
exposed and arrange them so they lay as close to the
body of the rope as possible. Tape them down.
Tape over the exposed tails with enough tape to adequately
cover the tails, plus an extra 1/2 fid on each side.
ta p I n g ta I l s
9
step
Approximately 1-1/2 fids
Approximately 2 fids
Cut back cover tails
Tape with black electrical tape