Scilogex MX-M - Manual (Page 5)

3
MX-M Microplate Mixer
2 Proper use
The instrument is designed for schools, laboratories or
factories. This device is not suitable for use in residential
areas or other areas that may cause danger to the user or
instrument as mentioned in Chapter 1.
3 Inspection
3.1 Receiving Inspection
Unpack the equipment carefully and check for any damages
which may have arisen during transport. If it happens, please
contact manufacturer for technical support.
Note:
If there is any apparent damage to the system,
please do not plug it into the power line.
3.2 Listing of Items
The packing includes the following items:
Items Qty
Main unit 1
Power adaptor 1
User manual 1
Table 1
4 Trial run
• Make sure the required operating voltage and power
supply voltage match.
• Ensure the power be off and the speed control knob at the
lowest position. Plug in the power adapter.
• Place a microtiter or other vessel in holder.
• Power ON the device and the Power LED is lit.
• Set the rated speed regulation and the device begins to
work.
• Set the rated speed regulation to ‘0’and the device stop
to work.
• Power OFF the device.
If these operations above are normal, the device is ready
to operate. If these operations are not normal, the device
may be damaged during transportation, please contact
manufacturer for technical support.