SONiVOX Wobble User Manual
Page 27
27
Issue: When I trigger a note with my MIDI controller, there is a noticeable delay in hearing
sound.
Solution: The audio buffer is set too high. Select a lower audio buffer. This is found in your
sound card setup in your host software.
Windows users: We recommend ASIO drivers for optimal low-latency performance (many
sound cards have these). If your particular sound card does not, you can find a generic, free
ASIO driver for your system online.
Also, check to see if IRC is enabled (see the IRC section for more information). If your DAW's
transport is stopped and IRC is enabled, Wobble will generate its own timing information
instead of having the host provide the information. This would result in an apparent delay that is
really just IRC doing its job.