T&D Machine Products Chrysler B-1 - Manual

INSTALLATION INSTRUCTIONS
Please follow these instructions to ensure the proper operation of your T & D MACHINE
PRODUCTS Chrysler B-1 Rocker Arm Assembly.
1. CYLINDER HEAD INSPECTION AND CLEANING
Inspect the cylinder heads to be sure they are clean and free of any burrs that may
interfere with the rocker stands. Inspect the tapped holes for proper thread depth.
Minimum thread depth is 3/4".
2. STUD INSTALLATION
Install the 3/8" studs in their respective positions, per Figure 1, and torque the studs to 60
inch-pounds. Install the 5/16" studs next, and torque them to 50 inch-pounds.
Figure 1 Stud Placement
P/N 05970