Taylor-Wharton KeepFull Telemetry System - Manual (Page 7)

Click on “DATA ONLINE” at the left of the screen. A log on box like shown below will appear.
Type your DataQwest assigned user name and password and click “OK”. You should have received this information via tele-
phone or letter from DATAQWEST. If you have not received your user name and password, contact DATAQWEST’s Technical
Service Group at (908) 464-2646 ext. 12. A screen that shows a list of states where your telemetry equipped tanks are located
will appear.
System Activation
Your Internet service provider is DataQwest Inc. Please
call their technical service group at (908) 464-2646 ext. 12
to commission your telemetry system. Units may be
commissioned Monday through Friday from 7:30 AM to
5:00 PM EST.
You will be instructed to hold the “Fill Button” depressed
for about 20 seconds. “LOG ON” and then “CALL” should
appear on the display. The unit will log on to the network.
Expect this to take about 5 minutes. If “ERROR” is
displayed a failure to connect with the network is indicated.
In this event, please call DataQwest. Upon successful
transmission the Telemetry unit will receive its alarm points
and begin to log data. It is now on-line and ready to report
liquid level information.
Web site
After the telemetry unit is activated wait at least 3 business
days for the unit to collect and transmit the first readings
before accessing the DataQwest Web site for your tank.
You may access your telemetry Web site at
http://
www.dataqwestinc.com . The following screen should
appear.
7