Main bearing beam (8 points), Baffle plate (4 points) – Tomei Powered SR22KIT/SR22 FORGED FULL COUNTER CRANKSHAFT User Manual

Page 10

Advertising
background image

⑥ MAIN BEARING BEAM (8 Points)

Make the modifications required as shown on the 8 points of the main bearing beams with
a mill or grinding tool.

・No modifications required when using the Tomei H-Beam Conrods.

⑦ BAFFLE PLATE (4 Points)

Make the required clearance of
1mm-1.5mm on the areas shown
on the illustation on the left, to
allow clearance for the Conrods.
These are the areas where the
Conrods will make contact during
rotation.

10

Advertising
See also other documents in the category Tomei Powered For the car: