Tomei Powered EXHAUST MANIFOLD FR-S / BRZ - Manual (Page 6)

Components
Please ensure all of the below are included. The quantity for each item is show in brackets ()
Required Tools
The following tools are required for installation.
BOLT SMOOTH PASTE (1) EXPREME STICKER (2)
ENGINE-SIDE GASKET (2)
FLANGE BOLT (2) FLANGE NUT (2)
THERMAL INSULATION SHEET (1)
EXHAUST MANIFOLD (1)
※EQUAL LENGTH TYPE PICTURED JOINT PIPE GASKET (1)
6
・General engine maintenance tools ・Torque wrench ・Official service manual
CAUTION
■ This product is intended for motorsport use and should only be used on a racing circuit or
a circuit closed off from public roads.
■ This product should be installed by a trained professional in a well-equipped workshop.
■ Only install this product on the specified vehicles to avoid product and/or engine damage.
■ Do not use excessive force when attaching or removing components as this may damage the item.
■ When installing, use the appropriate tools and safety gear to avoid injury.
WARNING
■ Install the product only when the engine and/or parts around the exhaust is cool.
■ Ensure that all parts are fitted correctly during installation to avoid potential fire hazards
and/or damage to the vehicle.
6