Tomei Powered HICASS LOCK II TYPE B - Manual (Page 15)

SHIM INSTALLATION
①Use the monkey wrenches on the nuts on both sides
to loosen them about 6mm.
WARNING
Be careful not to loosen the nut too much.
You do not want the nut to come off.
If the nut comes off, it may be impossible
to reinstall it. So never remove the nut.
② Take the shims apart and then install them as shown in the illustration below.
※ Cars with Electric Super HICAS
Shim
Shim Shim
Shim
6mm 6mm,
Cylinder Nut
③ Secure the Shims in place with the screws.
15
Shim Shim
Screw
Screw Screw
Screw