Tri-Tronics Pro 500XL - Manual (Page 19)

SETTING THE INTENSITY
Your Remote Trainer can give corrections at different intensity
levels, so you can match the level of correction to both the
training situation and your dog’s temperament.
There are two ways to adjust intensity level while training.
One way is to use the intensity knob on the top of the
transmitter, as explained in this section. All Tri-Tronics
Remote Trainers give you this method of adjusting
stimulation intensity.
The other way is to use the transmitter buttons, as explained
on page 16. This method does not apply to those models
which have only one transmitter button (Classic 70 and
Trashbreaker Ultra XL ).
The transmitter intensity knob gives you a choice of 6
intensities (5 levels of intensity on the Classic 70).
Intensity Knob Levels
Level 0: Transmitter is off – no stimulation.
Pressing a button activates collar to
receive signals
Level 1: Very low intensity
Level 2: Low intensity
Level 3: Medium intensity
Level 4: Medium-high intensity
Level 5: High intensity
Level 6: Very high intensity (not available on the Classic 70)
When increasing or decreasing intensity using the intensity
knob, be sure you have released the stimulation buttons,
or your new intensity selection will not take effect.
If you are not experienced at using Remote Trainers, there are
intensity selection tips in the training booklet and video that
came with your Remote Trainer.
T R I - T R O N I C S
S e t t i n g t h e I n t e n s i t y
Setting the Intensity Page 15