Vitek VT-1342 - Manual (Page 3)

1
BLOW DRYER
DESCRIPTION:
1. Air concentration attachment
2. Removable grating
3. No-slip inserts
4. Cold air button
5. Temperature control switch (I, II, III).
6. Speed control switch (0, I, II).
SAFETY PRECAUTIONS
• Before using the appliance, carefully read the
instructions.
• Please save these instructions, the warranty
card and, if possible, the packaging.
• Before turning on the blow dryer make sure
that the voltage of the outlet in your home
corresponds to the voltage indicated on the
appliance.
• The blow dryer is intended only for individual
use at home.
• Unplug the blow dryer from the power outlet
if you are not using it and before changing the
attachments or cleaning it.
• When unplugging the blow dryer from the
power outlet, pull it by the plug, not the cord.
• Make sure that children use the blow dryer
only in the presence of adults.
• Do not use the blow dryer if you notice any
damage to the power cord, plug or other
parts.
• Don't try to repair the appliance by yourself.
Contact an authorized service center.
• Store the appliance as far as possible from
sources of heat, moisture, and direct sun-
light.
• Use only the attachments included in the set.
• Do not use the appliance outdoors.
• Do not use the blow dryer in a bathroom,
shower or above a sink full of water.
• Do not submerge the appliance in water or
any other liquid. Do not touch the appliance
with wet or moist hands. If moisture never-
theless gets inside the appliance, immedi-
ately unplug it from the power outlet.
• Make sure that hair and foreign objects do
not get into the openings of a working blow
dryer.
• Do not use the blow dryer to dry artificial hair
or wigs.
• The attachments gets very hot during use.
USING THE BLOW DRYER
• Completely unwind the power cord.
• Plug the appliance into the power outlet.
• Set the speed control switch (6) to one of the
following positions:
"0"- off;
"I" - weak air flow for drying damp and not very
thick hair;
"II" - powerful air flow for drying wet, thick hair;
• Set the temperature switch (5) to one of the
following positions:
"I" - cold air for holding the form of your hairdo;
"II" - warm air for drying and styling hair;
"III" - hot air for fast drying of hair;
THE AIR CONCENTRATION ATTACHMENT
This attachment makes it possible to direct a
stream of heated air on a specific lock of hair.
THE COLD AIR FLOW BUTTON
In this mode, the temperature of the airflow is
reduced, making it possible to hold the form of a
lock that was first dried with warm air. You can
switch to this mode without turning off the blow
dryer.
CLEANING AND CARE
• From time to time, remove the grating (2) and
clean the openings on it.
• Wipe the housing with a damp cloth.
SPECIFICATIONS
Power source 220-230 V ~ 50 Hz
Maximum power 1800 W
The manufacturer reserves the right to change
the characteristics of appliances without warn-
ing.
The blow dryer is designed to last at least 3
years
GUARANTEE
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and to
the Law Voltage Regulation (73/23
EEC)
ENGLISH
Vt-1342.qxd 03.12.04 14:23 Page 1