Sony RM-V21 - Manual (Page 9)

Remote Button Descriptions (continued)
1 Remote Button Operates Function
TV
VCR
Cable box Channel up: -f
Channel down:-
Receiver Presetting frequency up: +, down: or
tuning frequency up:-f, down: -
TV
Cable box
Receiver/
amp
Volume up: +
Volume down: -
C mutin ^
TV
Receiver/
amp
Mutes volume on TV
Press again to turn muting off.
( wecal Q
TV Functions as the JUMP. FLASHBACK or
CHANNEL RETURN button, depending on
the TV’s manufacturer
Receiver Shifts band (FM/AM)
CD player Selects next disc
Tápe deck Selects tape deck: deck A or deck B (dual
cassette deck only“)
All
components Used this switch to change to the spedfic
component that you want to operate
CuOHT^
All
components Lights up the Commander’s buttons
(The lightwillautomaticallytumoff if no
button is pressed for more ^an 10 seconds)
‘For details, see “Note on Operating a Dual Cassette Deck“ on the next page.
16
If You Have a Scientific Atlanta Cable Box...
If your cable box is a Scientific Atlanta model that does not
have a power-on button, you can turn on the cable box by
pressing the CH+ or CH- buttons on the Commander.
Notes on Using the Remote Commander
■ Using this Commander will not increase the functions of
your TV, VCR, or cable box. The functions of the
Commander are limited to the functions of the components
themselves. For example, if your TV does not have a Recall
function, the RECALL button on this Commander will not
function with your TV.
■ If your cable box can control volume, be sure to set its
volume switch to a medium position. If the volume on the
cable box is turned down completely, you will not be able to
adjust your TV’s volume with the Commander.
■ If your video components are connected to an audio system,
make sure you've set up the Commander as described on
page 11.
■ Using the LIGHT function often will shorten the battery life.
Note on Operating a Dual Cassette Deck
To select a deck A or B on a dual cassette deck, use either the
number buttons (1 and 2), or the RECALL button, depending
on the type of the remote commander supplied with your dual
cassette deck, as explained below.
■ If the deck’s commander has two sets of tape operating
buttons and has no A/B button for deck selection, use the
number buttons (1 and 2): the 1 button selects Deck A, and
the 2 button selects Deck B.
■ If the deck’s commander has one set of tape operating
buttons, and has an A/B button for deck selection, use the
RECALL button to select Deck A or B.
17